AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Knockout Punch Driver Kits
Browse Knockout Punch Driver Kits products from leading manufacturers in Industrial Automation.
Parts
| # | Part # | Name | RFQ | |
|---|---|---|---|---|
| 1 | mfr-1731 | - | ||
| 2 | mfr-1732 | Fast, one-shot punching, no predrilling of pilot holes; Throat measures 8 in. (203 mm) deep; | ||
| 3 | mfr-229 | Panel Punch Unit, Contents Punch, Die Unit, Draw Stud, Square Counter Nut, Drive Nut, Hole Size 0.787 Inch x 0.982 Inch x 0.469 Inch, Capacity 16 Gauge Mild Steel, 10 Gauge Aluminum, Number of Pin 9, Minimum Pilot Hole Diameter 7/16 Inch | ||
| 4 | mfr-34288 | Punch Driver, Type Punch Driver, Quick Draw Hydraulic | ||
| 5 | mfr-36690 | - | ||
| 6 | mfr-39860g | - | ||
| 7 | mfr-7308 | Makes clean and accurate holes. For conduit sizes 2-1/2, 3, and 4 IN. Rated for punching in up to 10 gauge stainless steel. Excellent abrasion resistance for punching fiberglass and plastic. High-impact, rugged plastic carrying case. | ||
| 8 | mfr-737bb | Knockout Punch Kit, Manual, Contents (2) Punch, (2) Die, (1) Draw Stud, Round Punch, Minimum Conduit/Pipe Size 1-1/2 Inch, Maximum Conduit/Pipe Size 2 Inch, Package Rugged High Impact Plastic Carrying Case, Greenlee Brand | ||
| 9 | mfr-745h-3-4 | Slug-Splitter SC®, Punch Driver Kit, Knockout Punch Kit, 1.115 in Hole, 3/4 in | ||
| 10 | mfr-7610sb | - | ||
| 11 | mfr-7625 | - | ||
| 12 | mfr-7646 | SLUG SPLITTER® Knockout Kit, Tool Application: Construction Sites and Maintenance Jobs | ||
| 13 | mfr-7904-e | - | ||
| 14 | mfr-k2bb-1-1-4 | - | ||
| 15 | mfr-ls100x11sb4x | - | ||
| 16 | mfr-ls100x11ss4x | - | ||
| 17 | mfr-ls100xb | - | ||
| 18 | mfr-ls50l11b | LS50L Battery Driver, (1) 18 V Li-Ion Battery, (1) 120 V Battery Charger, (1) Spacer (1924AA), (1) 3/4-16 X 4 Draw stud (31872), (1) 3/8 X 4.8 Draw stud (20963), Slugbuster punches And Dies For (1/2 IN, 3/4 IN, 1 IN, 1-1/4 IN, 1-1/2 And 2.000 IN) Conduit | ||
| 19 | mfr-shd-1316 | - | ||
| 20 | mfr-shd-716 | - | ||
| 21 | mfr-shd-916 | - | ||
| 22 | mfr-gptk1 | The Gear Punch is the first gear driven knockout tool to feature a 7/16 quick change hex that allow users to cut down on installation time and increase jobsite efficiency. | ||
| 23 | mfr-gptk2 | The Gear Punch is the first gear driven knockout tool to feature a 7/16 quick change hex that allow users to cut down on installation time and increase jobsite efficiency. | ||
| 24 | mfr-7wbk100 | - | ||
| 25 | mfr-mp-02pro | HEAVY DUTY CUTTING: Cuts through 10 gauge steel (3.5mm) as well as aluminum, fiberglass and plastics. QUICKER SMOOTHER CUT: Will not bow panel or leave jagged edges. Heavy duty knockout punch driver for mild and stainless steel. |
No part selected
ASAP Semiconductor’s Certifications and Memberships
